Time zones 2 1. 3/4, or three quarters, is equal to 0.75. One inch is equal to 0.0000254 kilometres. Therefore, 34 inches is equal to 34 x 0.0000254 = 0.0008636 kilometres. To divide 3/4 by 2 that is the same thing as '(3/4) divided by (2/1)' or '(3/4)/(2/1)' because a whole number can also be written over one. Invert the denominator (2/1) and multiply with the numerator (3/4).
- Usbclean 3 4 4 Equals 2/3
- Usbclean 3 4 4 Equals 1/3
- Usbclean 3 4 4 Equals 0
- Usbclean 3 4 4 Equals Equal
The EEOC collects workforce data from employers with more than 100 employees (lower thresholds apply to federal contractors). Employers meeting the reporting thresholds have a legal obligation to provide the data; it is not voluntary. The data is collected using the reports below and is used for a variety of purposes including enforcement, self-assessment by employers, and research. Each of the reports collects data about gender and race/ethnicity by some type of job grouping. This information is shared with other authorized federal agencies in order to avoid duplicate collection of data and reduce the burden placed on employers. Although the data is confidential, aggregated data is available to the public.
EEO-1 Component 1 Report
The 2019 EEO-1 survey is not yet opened.
UPDATE: In light of the Coronavirus Disease 2019 (COVID-19) public health emergency, and consistent with delays in Federal reporting requirements across the government and other actions taken to relieve employers of unnecessary burdens during this crisis, the Commission has delayed the opening of the 2019 EEO-1 Component 1 Data Collection to a time when the agency anticipates that filers will have resumed more normal operations. See May 8, 2020 Federal Register Notice Delay in Opening of 2019 EEO-1 Component 1 and 2020 EEO-3 and 2020 EEO-5 Data Collections due to the Coronavirus Disease 2019 (COVID-19) Public Health Emergency.
On June 12, 2020, the EEOC received final approval from the Office of Management and Budget (OMB) to collect EEO-1 workforce demographic data (EEO-1 Component 1 data) from covered employers. The EEOC expects to begin collecting the 2019 EEO-1 Component 1 data along with the 2020 EEO-1 Component 1 data in March 2021 and will notify filers of the precise date the collections will open as soon as it is available.
The opening of the 2019 and 2020 EEO-1 Component 1 Data Collections, as well as the new deadline date, will be announced by posting a notice on the EEOC home page at www.eeoc.gov and sending a notification letter to eligible EEO-1 filers. When the collections open, the EEOC will provide online resources to assist filers with their submissions and the EEOC Employer Data Team Helpdesk will be available to respond to filer inquiries and to provide additional filing assistance (including, for example, guidance on processing mergers and acquisitions and other corporate changes).
The 2018 Component 1 EEO-1 survey is closed. The deadline to submit EEO-1 data was May 31, 2019. Findings from that survey year can be found here: https://www.eeoc.gov/statistics/employment/jobpatterns/eeo1/2018.
EEO-3 Report
UPDATE: In light of the Coronavirus Disease 2019 (COVID-19) public health emergency, and consistent with delays in Federal reporting requirements across the government and other actions taken to relieve employers of unnecessary burdens during this crisis, the Commission has delayed the opening of the 2020 EEO-3 Data Collection to a time when the agency anticipates that filers will have resumed more normal operations. See May 8, 2020 Federal Register Notice Delay in Opening of 2019 EEO-1 Component 1 and 2020 EEO-3 and 2020 EEO-5 Data Collections due to the Coronavirus Disease 2019 (COVID-19) Public Health Emergency.
EEO-3 filers should begin preparing to submit data in 2021. The EEOC expects to begin collecting the 2020 EEO-3 in January 2021 and will notify filers of the precise date the survey will open as soon as it is available.
The opening of the EEO-3 collection, as well as the new deadline date, will be announced by posting a notice on the EEOC home page at www.eeoc.gov and sending a notification letter to eligible filers. When the collection opens, the EEOC will provide online resources to assist filers with their submissions and the EEOC Employer Data Team Helpdesk will be available to respond to filer inquiries and to provide additional filing assistance.
The 2018 EEO-3 Survey is CLOSED.
The EEO-3 Report, formally known as the Local Union Report, is a biennial survey conducted every other year in the even calendar years. The filing deadline was December 31, 2018.
EEO-4 Report
The 2019 EEO-4 Survey is CLOSED. The U.S. Equal Employment Opportunity Commission (EEOC) officially opened the 2019 EEO-4 survey on August 6, 2019. The deadline to submit EEO-4 data was September 30, 2019.
The EEO-4 Report, formally known as the State and Local Government Report, is collected in odd-numbered years from State and Local governments.
EEO-5 Report
On June 12, 2020, the EEOC received final approval from the Office of Management and Budget (OMB) to collect EEO-1 workforce demographic data (EEO-1 Component 1 data) from covered employers. The EEOC expects to begin collecting the 2019 EEO-1 Component 1 data along with the 2020 EEO-1 Component 1 data in March 2021 and will notify filers of the precise date the collections will open as soon as it is available.
The opening of the 2019 and 2020 EEO-1 Component 1 Data Collections, as well as the new deadline date, will be announced by posting a notice on the EEOC home page at www.eeoc.gov and sending a notification letter to eligible EEO-1 filers. When the collections open, the EEOC will provide online resources to assist filers with their submissions and the EEOC Employer Data Team Helpdesk will be available to respond to filer inquiries and to provide additional filing assistance (including, for example, guidance on processing mergers and acquisitions and other corporate changes).
The 2018 Component 1 EEO-1 survey is closed. The deadline to submit EEO-1 data was May 31, 2019. Findings from that survey year can be found here: https://www.eeoc.gov/statistics/employment/jobpatterns/eeo1/2018.
EEO-3 Report
UPDATE: In light of the Coronavirus Disease 2019 (COVID-19) public health emergency, and consistent with delays in Federal reporting requirements across the government and other actions taken to relieve employers of unnecessary burdens during this crisis, the Commission has delayed the opening of the 2020 EEO-3 Data Collection to a time when the agency anticipates that filers will have resumed more normal operations. See May 8, 2020 Federal Register Notice Delay in Opening of 2019 EEO-1 Component 1 and 2020 EEO-3 and 2020 EEO-5 Data Collections due to the Coronavirus Disease 2019 (COVID-19) Public Health Emergency.
EEO-3 filers should begin preparing to submit data in 2021. The EEOC expects to begin collecting the 2020 EEO-3 in January 2021 and will notify filers of the precise date the survey will open as soon as it is available.
The opening of the EEO-3 collection, as well as the new deadline date, will be announced by posting a notice on the EEOC home page at www.eeoc.gov and sending a notification letter to eligible filers. When the collection opens, the EEOC will provide online resources to assist filers with their submissions and the EEOC Employer Data Team Helpdesk will be available to respond to filer inquiries and to provide additional filing assistance.
The 2018 EEO-3 Survey is CLOSED.
The EEO-3 Report, formally known as the Local Union Report, is a biennial survey conducted every other year in the even calendar years. The filing deadline was December 31, 2018.
EEO-4 Report
The 2019 EEO-4 Survey is CLOSED. The U.S. Equal Employment Opportunity Commission (EEOC) officially opened the 2019 EEO-4 survey on August 6, 2019. The deadline to submit EEO-4 data was September 30, 2019.
The EEO-4 Report, formally known as the State and Local Government Report, is collected in odd-numbered years from State and Local governments.
EEO-5 Report
UPDATE: In light of the Coronavirus Disease 2019 (COVID-19) public health emergency, and consistent with delays in Federal reporting requirements across the government and other actions taken to relieve employers of unnecessary burdens during this crisis, the Commission has delayed the opening of the 2020 EEO-5 Data Collection to a time when the agency anticipates that filers will have resumed more normal operations. See May 8, 2020 Federal Register Notice Delay in Opening of 2019 EEO-1 Component 1 and 2020 EEO-3 and 2020 EEO-5 Data Collections due to the Coronavirus Disease 2019 (COVID-19) Public Health Emergency.
EEO-5 filers should begin preparing to submit data in 2021. The EEOC expects to begin collecting the 2020 EEO-5 in January 2021 and will notify filers of the precise date the survey will open as soon as it is available.
The opening of the EEO-5 collection, as well as the new deadline date, will be announced by posting a notice on the EEOC home page at www.eeoc.gov and sending a notification letter to eligible filers. When the collection opens, the EEOC will provide online resources to assist filers with their submissions and the EEOC Employer Data Team Helpdesk will be available to respond to filer inquiries and to provide additional filing assistance.
The 2018 EEO-5 Survey is CLOSED.
The EEO-5 Report, formally known as the Elementary-Secondary Staff Information Report, is a joint requirement of the EEOC and the Office for Civil Rights (OCR) of the Department of Education. It is conducted biennially, in the even numbered years, and covers all public elementary and secondary school districts with 100 or more employees in the United States. The filing deadline was November 30, 2018.
calculator.com wishes everyone to BE WELL, STAY WELL, GET WELL. The most important thing you can do right now is STAY HOME as much as possible. Use our new COVID-19 social distancing impact calculator to see why you don't need to take the risk, for you, for your family, for your friends, for all of us, calculate it!
The COVID-19 social distancing impact calculator was developed 100% @home.- Most common
- Atomic-nuclear
- Electromagnetic
- Physico-chemical
- Universal
- X-Ray
Help and Tips
Color Coding
Simple number or constant.
Action that involves two numbers (i.e. 6+2).
Action that requires one number (i.e. 40%).
Clears something.
Usbclean 3 4 4 Equals 2/3
Gives a result.
Actions about the calculator or the tape.
Number formating actions fractions and scientific notation.
Keyboard
You can use your numeric keypad to insert numbers along with the keys 'enter', 'equals', 'backspace', 'delete', as well as the + - * / keys.
Tape and Tape Buttons
All calculations are saved on the tape. Click on any number or operator on the tape and change it at any time. Hit equals and the new result will appear.
You can use the print button to print out the tape.
Clearing Buttons
Clear button clears the last input.
All clear button clears the calculator, tape, and resets any functions.
Memory clear button clears the memory. Imazing 2 8 5 (9906) download free.
Memory Buttons
Memory recall button retrieves the number you have in memory and places it in the display field.
Memory plus button adds the number displayed to the contents of the memory.
Memory minus button subtracts the number displayed from the contents of the memory.
Function Buttons
Percent button is used to find the percentage of a number. Enter the percentage amount, click the % button, then enter the number you want the percentage of, and then click equals. i.e. 20% 125 = 25 where 25 is 20% of 125. Note: The percent function will also work if you enter the number first and then the percentage you want i.e. 125 %20 = 25.
Fractions
To enter a fraction of the form 3/4. Click a number and then click fraction bar, then click another number.
Usbclean 3 4 4 Equals 1/3
You can use fraction space button to create a number of the form 5 3/4. Enter a number, then click fraction space, click another number and then click on the fraction bar button, lastly enter another number.
Decimal format button and Fraction format button work as pair. When you choose the one the other is switched off.
Decimal format button is used for all decimal work. Also to change a fraction of the form 3/4 to the decimal 0.75, or a fraction of the form 7/4 or a mixed number of the form 1 3/4 to the decimal 1.75. Click on the decimal format button, enter a fraction or mixed number, then click equals. If the fraction or mixed number is only part of the calculation then omit clicking equals and continue with the calculation per usual. i.e. 3/4 DEC x 6 =.
Fraction format button is used to work with all fractions. Also to change a decimal of the form 0.5 to the fraction 1/2, or change a decimal of the form 1.75 to a mixed number of the form 1 3/4 or to the fraction 7/4, or a fraction of the form 7/4 to the mixed number 1 3/4. Click the fraction format button, enter a decimal, click equals and then click on a fraction form and then click equals. If the fraction of decimal is part of a calculation, omit clicking equals and continue with the calculation.
Usbclean 3 4 4 Equals 0
Proper fraction button and Improper fraction button work as pair. When you choose the one the other is switched off.
Proper fraction button is used to change a number of the form of 9/5 to the form of 1 4/5. A proper fraction is a fraction where the numerator (top number) is less than the denominator (bottom number).
Improper fraction button is used to change a number of the form of 1 4/5 to the form of 9/5. An improper fraction is a fraction where the numerator (top number is greater than or equal to the denominator (bottom number).