- Silhouettefx Silhouette 7 5 8 X 10 Inch Bolts
- Silhouettefx Silhouette 7 5 8 X 100
- Silhouettefx Silhouette 7 5 8 X 10 Copper Ground Rod
- Silhouettefx Silhouette 7 5 8 X 10
Steel Targets are what we do, Here at Rogue Shooting Targets we literally have tons of steel targets in stock for just about everyone. You may choose to buy just a steel gong so you can make your own hanger or stand. We also have our steel target stands and steel target holders and even kits that have both the target stand and steel target so when it arrives, you can start shooting. Our AR500 and AR550 targets add a new experience to target shooting. With immediate feedback, the steel target will give the shooter instant gratification letting the shooter know if they hit their mark with both visual and audio confirmation. Even in a rapid series of shots the shooter will know if they hit or missed, unlike other target types. Hearing the hit on your target at long distances is very exciting and you spend less time inspecting targets and more time shooting. Metal targets have other advantages over traditional paper or cardboard targets when shooting in unfavorable conditions, as they are not greatly affected by rain or wind. All of our targets can be shot on either side as there are no brackets welded, allowing the shooter to get maximum use from targets and not being concerned with broken welds. Our targets are made to last thousands of rounds when used with proper cartridges.
SilhouetteFX Silhouette 7.5.3 (x64) 110 Mb Invaluable in post-production, Silhouette continues to bring best-of-class tools to the visual effects industry. Using an entirely stereoscopic workflow, all capabilities of Silhouette, including its award winning rotoscoping, non-destructive paint, keying, matting, warping, morphing, and 2D-3D. SilhouetteFX Silhouette 7.5.3 (x64) 110 Mb Invaluable in post-production, Silhouette continues to bring best-of-class tools to the visual effects industry. Using an entirely stereoscopic workflow, all capabilities of Silhouette, including its award winning rotoscoping, non-destructive paint, keying, matting, warping, morphing, and 2D-3D.
A common question now days is why AR550 steel? Don't most steel target manufacturers use AR500? Yes and Yes. In order to explain we need to go back in time when steel targets were primarily out of T-1 steel, it was because it was the best readily available material to use. As time went on materials evolved and we had a new 'better' option, it was AR500 and it worked way better than the T-1 steel but still had issues with one of the most popular cartridges used, the 5.56, this cartridge was hard on the AR500 material at closer ranges and caused pits due to the high velocity of the projectiles, that may not have been a big concern if you were shooting a .17 Remington or a 22-250 but the 5.56 is probably the most widely used cartridge in the world. Law Enforcement Agency's, Military, Competitive 3 gun shooters not to mention the general recreational shooter, they all love there AR 15 rifles and they are mostly chambered in 5.56, so what to do? Along came the next generation of material and it solves the long time problem with pitted steel targets, it is AR550 and it works well.
Our steel plates are all 100% domestic laser cut AR500 or better, they are NOT plasma cut to preserve the characteristics of the steel. After the targets have been laser cut they are washed in solvent to remove oils. They are shipped unpainted allowing you to paint whatever color you choose or not paint at all, some shooters prefer to just oil and shoot. After painting, the bullet impact will mark the target with a hit by blowing off the paint, just repaint and reuse. All of our target plates are designed to be used with both handgun and rifles.
1/2″ AR500 Steel Gongs
1/2″ steel gongs 2″ to 15″.
$24.95-$126.95
3/8″ AR550 Steel gongs
3/8″ steel gongs 2″-20″.
$20.90-$159.95
3/8″ AR550 Steel Squares
3/8″ square targets 8″x 8″ to 24″x 24″. Zaxwerks 3d layer tools 2 0 0 download free. Our 3/8″ square target plates have a .530″ square hole cut to fit the 1/2″ hardened carriage bolt used in our Heavy Duty Tension Holder or our T-Post Hangers. They also have holes at top corners to allow hanging as gong plate with chains or the like.
$39.95-$229.95
3/8″ AR550 Targets 3 packs
3 pack pricing for our selected 3/8″ steel gong targets and 3/8″ steel square targets.
$75.95-$169.95
3/8″ AR550 Steel Tension Mount Targets
3/8″ Tension Mount Targets have a .530″ square hole cut to fit the hardened 1/2″ carriage bolt used in our Heavy Duty Tension Holder. Can also be used with our T-Post hangers. Sized for Steel Challenge Stages.
$53.95-$159.95
3/8″ AR550 & 1/2″ AR500 Steel Silhouette Targets
Our 2/3 scale and full size IDPA silhouette plates have a .530″ square hole cut to fit the hardened 1/2″ carriage bolt used in our Heavy Duty Tension Holder, they also have holes at each shoulder to allow hanging with chains or such.
$99.95-$249.95
3/8″ AR550 Static Targets
Our Static targets are available in 3/8″ thickness, static targets are designed to hang at forward angle and take a beating. Our static targets can be reversed and shot from both sides, extending the life of the target. These shooting targets are used with our angled target holders, which come in either 10 degrees or 20 degrees forward tilt. Originally designed for the U.S.A Navy, now available for everyone
AR500 Steel Target Kits Our most common steel shooting targets and target stands put into kits at package pricing.
3/8″ x 10″ AR550 Gong with our Swinging Gong Stand for rifle shooters
3/8″ x 10″ AR550 Round Tension Mount plate with our Heavy Duty Tension Stand for pistol or rifle shooters
1/2″ x 15″ AR500 Gong with Swinging Gong Stand for long range shooters.
$174.95-$249.95
AR550 Steel Plate Rack Targets – We offer two models of AR550 plate rack targets, the Junior Plate rack which has three 3/8″ x 8″ AR550 targets and is easy for one person to set up and the standard plate rack which has six 3/8″ x 8″ AR550 targets. Both are reset by puling a nylon reset strap from shooting position so you can stop all the walking to reset your targets.
Target Holders
Heavy Duty Tension Holder, is used with any of our steel shooting targets that have a .530″ square hole, just attach steel target to holder and slip over top of wood 2 x 4 post ( wood 2 x 4 not included) Can be used by rifle and pistol shooters.
'T'- Post Hanger, are used with a heavy duty t-post to hang our steel targets. Use a pair along with a chain or strap kit to hang our gong plates or use as singles to hang our steel target plates with a .530″ square hole. sold as pairs
Target Stands
Swinging Gong Stand, is made from .095″ x 1″ round steel tubing, it sits 28″ tall holding even the large 16″ square plates approximately 8″ off ground, giving plenty of room to swing. Can be used with our square shooting plates or our gong plates. Its legs stand 29″ wide from front to back and 53″ from side to side giving plenty of stability. Just bolt legs to top hanger and slide top bar into hanger, comes with powder coated finish. Can be used by pistol or rifle shooters.
Heavy Duty Tension Stand, is used to hang any of our steel shooting targets that have a .530″ square hole (square plates, tension plates or silhouettes). It is made from heavy gauge steel and has powder coated finish, has a 27″ x 29 1/2″ footprint. Can be used by pistol or rifle shooters. Customer supplies wood 2 x 4.
Hardware – Find misc. fasteners, mounting hardware and replacement springs and such for your steel shooting target or stand.
Chain Kit, use to hang all our plates except the tension plates.
Strap Kit, use to hang our gongs and plates.
AR500 Steel Targets
1/2' AR500 Steel Gong Targets
1/2″ steel gong targets 2″ to 15″.
$24.95 – $126.95
3/8' AR500 Steel Gong targets
3/8″ steel gong targets 2″-20″.
$14.95 – $129.95
3/8' AR500 Steel Square Targets
3/8″ square targets 8″ x 8″ to 24″ x 24″.
$33.95 – $199.95
3/8' AR500 Steel Target 3 Packs
3 pack pricing for our selected 3/8″ steel gong…
$27.95 – $124.95
3/8' AR500 Steel Tension Mount Targets
3/8″ Tension Mount Steel Targets have a .530″ square…
$47.95 – $145.95
3/8' & 1/2' AR500 Steel Silhouette Targets
Our 2/3 scale and full size IDPA silhouette plates have…
$94.95 – $249.95
3/8' AR500 Static Steel Targets
Our Static Steel targets are available in 3/8″ thickness…
$32.95 – $85.95
AR500 Steel Targets Kits
AR500 Steel Target Kits
3/8″ x 10″ AR500 Gong with our Swinging Gong Stand…
$174.95-$249.95
AR500 Steel Target Kits
Vitamin r 2 54 – personal productivity tool template. 3/8″ x 10″ AR500 Round Tension Mount plate with our Heavy Duty Tension Stand…
$174.95-$249.95
AR500 Steel Plate Rack Targets
We offer two models of AR500 plate rack targets.
Steel Target Stands & Holders
Target Holders
Heavy Duty Tension Holder and 'T'- Post Hanger
Target Stands
Swinging Gong Stand, is made from .095″ x 1″ round steel tubing…
Target Stands
Heavy Duty Tension Stand, is used to hang any of our steel targets that have a .530″…
Hardware for Steel Targets
- Address: 836 Mason Way, Medford, OR 97501
- |
- Phone Number:541-840-3981
© Copyright 2020 Rogue Shooting Targets LLC - All Rights Reserved
- |
- |
- |
- |
Steel Targets are what we do, Here at Rogue Shooting Targets we literally have tons of steel targets in stock for just about everyone. You may choose to buy just a steel gong so you can make your own hanger or stand. We also have our steel target stands and steel target holders and even kits that have both the target stand and steel target so when it arrives, you can start shooting. Our AR500 and AR550 targets add a new experience to target shooting. With immediate feedback, the steel target will give the shooter instant gratification letting the shooter know if they hit their mark with both visual and audio confirmation. Even in a rapid series of shots the shooter will know if they hit or missed, unlike other target types. Hearing the hit on your target at long distances is very exciting and you spend less time inspecting targets and more time shooting. Metal targets have other advantages over traditional paper or cardboard targets when shooting in unfavorable conditions, as they are not greatly affected by rain or wind. All of our targets can be shot on either side as there are no brackets welded, allowing the shooter to get maximum use from targets and not being concerned with broken welds. Our targets are made to last thousands of rounds when used with proper cartridges.
A common question now days is why AR550 steel? Don't most steel target manufacturers use AR500? Yes and Yes. In order to explain we need to go back in time when steel targets were primarily out of T-1 steel, it was because it was the best readily available material to use. As time went on materials evolved and we had a new 'better' option, it was AR500 and it worked way better than the T-1 steel but still had issues with one of the most popular cartridges used, the 5.56, this cartridge was hard on the AR500 material at closer ranges and caused pits due to the high velocity of the projectiles, that may not have been a big concern if you were shooting a .17 Remington or a 22-250 but the 5.56 is probably the most widely used cartridge in the world. Law Enforcement Agency's, Military, Competitive 3 gun shooters not to mention the general recreational shooter, they all love there AR 15 rifles and they are mostly chambered in 5.56, so what to do? Along came the next generation of material and it solves the long time problem with pitted steel targets, it is AR550 and it works well.
Our steel plates are all 100% domestic laser cut AR500 or better, they are NOT plasma cut to preserve the characteristics of the steel. After the targets have been laser cut they are washed in solvent to remove oils. They are shipped unpainted allowing you to paint whatever color you choose or not paint at all, some shooters prefer to just oil and shoot. After painting, the bullet impact will mark the target with a hit by blowing off the paint, just repaint and reuse. All of our target plates are designed to be used with both handgun and rifles.
1/2″ AR500 Steel Gongs
1/2″ steel gongs 2″ to 15″.
$24.95-$126.95
3/8″ AR550 Steel gongs
3/8″ steel gongs 2″-20″.
$20.90-$159.95
3/8″ AR550 Steel Squares
3/8″ square targets 8″x 8″ to 24″x 24″. Our 3/8″ square target plates have a .530″ square hole cut to fit the 1/2″ hardened carriage bolt used in our Heavy Duty Tension Holder or our T-Post Hangers. They also have holes at top corners to allow hanging as gong plate with chains or the like.
$39.95-$229.95
3/8″ AR550 Targets 3 packs
3 pack pricing for our selected 3/8″ steel gong targets and 3/8″ steel square targets.
$75.95-$169.95 Scrutiny 8 1 9 – suite of web optimization tools.
3/8″ AR550 Steel Tension Mount Targets
3/8″ Tension Mount Targets have a .530″ square hole cut to fit the hardened 1/2″ carriage bolt used in our Heavy Duty Tension Holder. Can also be used with our T-Post hangers. Sized for Steel Challenge Stages.
$53.95-$159.95
3/8″ AR550 & 1/2″ AR500 Steel Silhouette Targets
Our 2/3 scale and full size IDPA silhouette plates have a .530″ square hole cut to fit the hardened 1/2″ carriage bolt used in our Heavy Duty Tension Holder, they also have holes at each shoulder to allow hanging with chains or such.
$99.95-$249.95
3/8″ AR550 Static Targets
Our Static targets are available in 3/8″ thickness, static targets are designed to hang at forward angle and take a beating. Our static targets can be reversed and shot from both sides, extending the life of the target. These shooting targets are used with our angled target holders, which come in either 10 degrees or 20 degrees forward tilt. Originally designed for the U.S.A Navy, now available for everyone
AR500 Steel Target Kits Our most common steel shooting targets and target stands put into kits at package pricing.
3/8″ x 10″ AR550 Gong with our Swinging Gong Stand for rifle shooters
3/8″ x 10″ AR550 Round Tension Mount plate with our Heavy Duty Tension Stand for pistol or rifle shooters
1/2″ x 15″ AR500 Gong with Swinging Gong Stand for long range shooters.
$174.95-$249.95
AR550 Steel Plate Rack Targets – We offer two models of AR550 plate rack targets, the Junior Plate rack which has three 3/8″ x 8″ AR550 targets and is easy for one person to set up and the standard plate rack which has six 3/8″ x 8″ AR550 targets. Both are reset by puling a nylon reset strap from shooting position so you can stop all the walking to reset your targets.
Target Holders
Heavy Duty Tension Holder, is used with any of our steel shooting targets that have a .530″ square hole, just attach steel target to holder and slip over top of wood 2 x 4 post ( wood 2 x 4 not included) Can be used by rifle and pistol shooters.
'T'- Post Hanger, are used with a heavy duty t-post to hang our steel targets. Use a pair along with a chain or strap kit to hang our gong plates or use as singles to hang our steel target plates with a .530″ square hole. sold as pairs
Target Stands
Swinging Gong Stand, is made from .095″ x 1″ round steel tubing, it sits 28″ tall holding even the large 16″ square plates approximately 8″ off ground, giving plenty of room to swing. Can be used with our square shooting plates or our gong plates. Its legs stand 29″ wide from front to back and 53″ from side to side giving plenty of stability. Just bolt legs to top hanger and slide top bar into hanger, comes with powder coated finish. Can be used by pistol or rifle shooters.
Heavy Duty Tension Stand, is used to hang any of our steel shooting targets that have a .530″ square hole (square plates, tension plates or silhouettes). It is made from heavy gauge steel and has powder coated finish, has a 27″ x 29 1/2″ footprint. Can be used by pistol or rifle shooters. Customer supplies wood 2 x 4.
Hardware – Find misc. fasteners, mounting hardware and replacement springs and such for your steel shooting target or stand.
Chain Kit, use to hang all our plates except the tension plates.
Strap Kit, use to hang our gongs and plates.
AR500 Steel Targets
1/2' AR500 Steel Gong Targets
1/2″ steel gong targets 2″ to 15″.
$24.95 – $126.95
3/8' AR500 Steel Gong targets
Silhouettefx Silhouette 7 5 8 X 10 Inch Bolts
3/8″ steel gong targets 2″-20″.
$14.95 – $129.95
3/8' AR500 Steel Square Targets
3/8″ square targets 8″ x 8″ to 24″ x 24″.
$33.95 – $199.95
3/8' AR500 Steel Target 3 Packs
3 pack pricing for our selected 3/8″ steel gong…
$27.95 – $124.95
3/8' AR500 Steel Tension Mount Targets
3/8″ Tension Mount Steel Targets have a .530″ square…
$47.95 – $145.95
3/8' & 1/2' AR500 Steel Silhouette Targets
Silhouettefx Silhouette 7 5 8 X 100
Our 2/3 scale and full size IDPA silhouette plates have…
$94.95 – $249.95
3/8' AR500 Static Steel Targets
Our Static Steel targets are available in 3/8″ thickness…
$32.95 – $85.95
AR500 Steel Targets Kits
AR500 Steel Target Kits
Silhouettefx Silhouette 7 5 8 X 10 Copper Ground Rod
3/8″ x 10″ AR500 Gong with our Swinging Gong Stand…
$174.95-$249.95
AR500 Steel Target Kits
3/8″ x 10″ AR500 Round Tension Mount plate with our Heavy Duty Tension Stand…
$174.95-$249.95
AR500 Steel Plate Rack Targets
We offer two models of AR500 plate rack targets.
Steel Target Stands & Holders
Target Holders
Heavy Duty Tension Holder and 'T'- Post Hanger
Target Stands
Silhouettefx Silhouette 7 5 8 X 10
Swinging Gong Stand, is made from .095″ x 1″ round steel tubing…
Target Stands
Heavy Duty Tension Stand, is used to hang any of our steel targets that have a .530″…
Hardware for Steel Targets
- Address: 836 Mason Way, Medford, OR 97501
- |
- Phone Number:541-840-3981
© Copyright 2020 Rogue Shooting Targets LLC - All Rights Reserved
- |
- |
- |
- |
